ATS-Tanner
Banding Systems Inc.
1234 Old Carriage Way
Oakville ON L6M 2E3 (Canada)
Phone +1 905 815 9999
Deliveries, Warehouse
and Showroom
ATS-Tanner
Banding Systems Inc.
2390 Wyecroft Road Unit 1
Oakville, Ontario L6L 6M8
info@ats-tanner.ca
Contact form
Site plan / address
NAVIGATION
- Applications
- Machines
- ATS-MS 420S
- US-2000 AD
- US-2000 AD-V
- US-2000 LD
- US-2000 ASX SP
- US-2000 BDE
- US-2000 CSW
- US-2000 FAB-A
- US-2000 LBM-MS-V
- US-2000 MDM-P
- US-2000 PIC
- US-2000 PIC-CB-A
- US-2000 RD-V
- US-2000 Transit
- US-2000 TRS-L
- US-2000 TRS-SLM
- US-2000 TRS-SW
- US-2000 TRW-DMS-MP
- US-2000 TTP
- US-2100
- US-2100 TTP
- Consumables
- Company
CONTACT
ATS-Tanner
Banding Systems Inc.
1234 Old Carriage Way
Oakville ON L6M 2E3 (Canada)
Phone +1 905 815 9999
Deliveries, Warehouse
and Showroom
ATS-Tanner
Banding Systems Inc.
2390 Wyecroft Road Unit 1
Oakville, Ontario L6L 6M8
info@ats-tanner.ca
Contact form
Site plan / address
NEWSLETTER
Worldwide Presence
US-2000 TRS-SLM
Your added value: higher capacity, more efficiency and cost savings.
The US-2000 TRS-SLM can be directly connected to a saddlestitcher or adhesive binder with a stacker and transfers the product stack (1- to 3 benefit) at full speed capacity. You receive a perfectly aligned product stack thanks to the alignment on all sides of the stack and the soft or hard stack compression before banding. By banding with adjustable tension your printed products are bundled without any damage to the edges.
Option US-2000 TRS-SLM-A
The US-2000 TRS-SLM-A takes over the product stack (1-to 3 benefit) out of the stacker onto the shuttle worth conveyor. Side guide plates go into the stacker and the retracted flaps insure that the stack is removed from it. The servo-handling system pushes the stack into the banding machine. The inflow control is quick and easy due to the adjustable side guide plates.
Further options
- ABC-dispenser
- 3 benefits with 3 guides
- Warning sensor for banding material usage
- printer position control for printed banding material
- Single or double press
Technical data
| Performance | up to 24 bandings per minute |
| Band width | 20, 30, 50 mm |
| Voltage | 230V, 13A |
| Electrical Power | depending on model |
| Weight | depending on model |
| Dimension | depending on model |
| Arch sizes (WxH) | 360 x 260 mm (others upon request) |
Material in use:
Banding film
Banding paper
Imprinted banding material
Producer:
ATS-Tanner Banding Systems AG
